Pocket Watch Instructions
Instructions for use:
Our new pocket watch utilizes an inner adapter to hold the Apple Watch within the pocket watch case. Please follow the instructions for correct and secure usage.
- Select the correct adapter size (the SMALL size fits Apple Watch 38mm/40mm/41mm and the LARGE size fits Apple Watch 42mm/44mm/45mm) and place the Apple watch into it, inserting the dial side into the dial opening of the adapter first and then snapping it into place.
- Secure the inner adapter into the pocket watch housing by pressing it gently until it snaps in place. Notice that there is a large opening on the right side of the pocket watch to allow for the Apple Watch crown, speaker and button. The three metal tabs on the back of the pocket watch will adhere to the corresponding slots on the adapter.
- To remove the adapter from the pocket watch case, pinch the Apple watch by holding it from the face and back sensor, and give it a wiggle towards the top of the pocket watch, pushing it out from the back sensor until it releases.
- To remove the Apple Watch from the adapter, release the side opposite of the dial first.
Please contact us at info@bucardo.com if you have any questions.